A water-resistant sealer similar to our standard GEMCOAT™ sealer, but uses a water-based formula versus solvent-based.
Due to its water-based formulation, there is virtually no odor, making it the perfect application for sensitive environments like schools, hospitals and office buildings that may already be occupied.
- Water-based = low odor and water clean-up
- Good for currently-inhabited buildings
- Full-gloss finish
- Cleanable with water-based cleaners
1. Substrate must be dry and clean of oil and dirt.
2. Apply GEMCOAT-WB™ using a soft brush, roller or spray.
3. Let stand for a minimum of 30 minutes.
GEMCOAT-WB™ must be protected from freezing during storage.
Substrate and product must be above 55 degrees F when applied.
Available in 5 gal. pails, with EZ-Pour spout.